Zvolit vůz
Vyberte vůz z nabídky
Hledat naše produkty

KW Suspensions Coilover -Variant 1- Stainless hight adjustable front 25-45mm/ Rear 20-40mm (Models without Electronic damper control)

102200BN MINI F54LCI -  KW Suspensions Coilover -Variant 1- Stainless hight adjustable front 25-45mm/ Rear 20-40mm (Models without Electronic damper control) 102200BN MINI F54LCI -  KW Suspensions Coilover -Variant 1- Stainless hight adjustable front 25-45mm/ Rear 20-40mm (Models without Electronic damper control)
38 687,25 CZK Včetně DPH
(31 972,93 CZK bez DPH)
set
Přidat do košíku

Číslo výrobku: 102200BN

Stav položky: Nové

Tento výrobek se hodí pro BMW jak s řízením vlevo, tak vpravo.

F54LCI

Značka:

Cooper ALL4
Cooper D
Cooper S ALL4
Cooper S JCW ALL4
Cooper S JCW
Cooper SD ALL4
Cooper SD
Cooper S
Cooper
John Cooper Works
One D
One

(Pamatujte, že dopravné bude dopočítáno až v nákupním košíku)

Ukázat detail

Doba montáže: 3-4hodin(y).

Váha: 25,00 Kg

Rozměry (DxHxŠ): 100x40x25 cm

Počet tohoto dílu na vozidle: 1 set

KW Germany! amongst others supplier for Alpina!
Please also see www.kwsuspensions.com and fell free to contact us for an non-committal offer if you find something interesting, we got the widest range and the lowest prices!

The product -KW Verison 1-
Part number: 102200BN
Version: Variant 1
Damping adjustment: None
Lowering FA/RA: 25-45mm/20-40mm
Adjustment FA/RA: Thread/Thread
Material: Stainless steel
Product Category: Coilover kits
Axle Load FA/RA: -1150kg/-1290kg
Year of Prod.: 09/2019-

Please note: the mm. specification is measured from the standard hight of the BMW, if its equiped with for example a M-Tech. or BMW sport suspension which is about 15MM lower, you have to deduct the the mm in the specification we make for example = 40/40MM will then be 25/25MM! if you need help to find out whether your BMW is equiped with a BMW sport suspension or not, please don´t hesitate to contact your us, please have the last 7 figures of the chassinumber ready so we can check up on your BMW!

KW Variant 1 inox-line

Sporty handling combined with outstanding looks. With factory pre-configured damping.
The KW coilover kit Variant 1 "inox-line" is our entry model for more driving pleasure with an attractive and individually adjustable lowering. Due to its high-quality finish, the use of struts made from stainless steel, corrosion resistant springs and bump stops as well as compatible components stands for long driving pleasure - not just the car's life.

Continuous lowering
With the KW coilover Variant 1 you can achieve maximum lowering in the tested adjustment range. Depending on vehicle model this varies between 30 to 70mm or 50 to 90mm. Even after years you can adjust the height quickly and easily due to the dirt resistant trapezoid thread and composite collar. Lowering at the front axle is made using our one piece composite height adjuster, on the rear axle this is the same unless the car has a seperate spring and shock absorber. The supplied rear height adjuster sits either above or below the rear spring.

The benchmark for tuning fans
KW coilover Variant 1 "inox-line" satisfies the sporty driver with its harmonic basic setup. Our engineers develop for each vehicle a specific damper setup and spring rate to increase the driving pleasure with optimal balance of sportiness and practicality. In the end, you don't buy any coilover, but a KW coilover which has been developed specifically for your type of vehicle. KW as a manufacturer uses only its own resources, high quality components and the same damper technology as high-volume manufacturers. With the KW coilovers Variant 1 "inox-line", rolling motions of the body will be reduced during compression and you benefit from genuine directness and sportier handling while driving.

Trust In Our Experience
We are the market leader and innovator of individual suspension solutions for road and racetrack for more than 15 years. No matter where in the world, car driver, automotive manufacturers and tuners rely on our KW coilovers "Made in Germany". Each KW coilover kit, developed and manufactured in the Swabian town Fichtenberg, is subject to extensive stress tests during production to meet the high standards of our KW quality management. Of course, we give as a German manufacturer a 2-year warranty on our more than 4600 applications suspension solutions, which exceed OEM quality. The warranty will increase up to 5 years when the kit has been installed at one of our KW specialist dealers.

- Optimally pre-adjusted
- Sporty and comfortable dampening technology
- Stainless steel technology "inox-line"
- Individually height adjustable
- tested adjustment range
- Ready to install complete solution
- High quality components for a long durability
- Complete documentation for easy handling

Setup - Factory pre-configured damping setup
The KW coilover Variant 1 "inox-line" has a vehicle-specific, fixed configured damper setup. The spring and damper match perfectly, so that you will experience an optimized balance of sportiness and comfort while driving.

Even with full load and maximum axle loads, the dampers always work with a sporty characteristic. Tuning fans whose focus are "Show & Shine" events are interested in the KW Variant 1 "inox-line".

Let one of our BMW specialized workshops do the mounting, we got the know how and low prices!

Obdržíte zprávu, jakmile produkt naskladníme.
Uveďte prosím svoji emailovou adresu do pole pod textem.

-

Jakmile obdržíte emailovou zprávu, budete ze seznamu vymazáni.

Thank you for visiting
Schmiedmann!
We noticed you are from...

United States United States